PerMix Paddle Mixers

PerMix designs the full range of Paddle Mixers and Paddle Mixer Dryers (Ribbon mixes with jackets & vacuum) , including the lab size (5L full) & pilot size (up to 45L full) models for Research & Development purpose. The small size machine is very helpful for customers when the ingredients for R&D are expensive, thus helping our customer to save their limited budget at the first stage. With the good performance of the lab & pilot mixer, it is easy to scale up for a medium size or even bigger one.

The installation of PerMix Side Entry Multi-chopper in the basic PTP powder mixer enables the breaking down of agglomerates during the mixing process. Together with the mixing element, the PerMix Multi-chopper removes lumps in the initial product, chops pasty adhesives and hinders the formation of agglomeration during the moisturizing of powdered substances. The PerMix Multi-chopper is operated independently by its own motor, running at high speed of 1,500rpm (sometimes 3,000rpm).

PerMix Paddle Blenders and Paddle Mixers can come with a welded jacket around the mixing vessel for heating/cooling by steam, thermal oil, or water. We supply different types of jacket, such as shell in shell, dimple plate, and half-pipe coil. For heating jacket, insulation layer should be supplied to protect the people from being burnt, with riveted or welded wrapper. ASME/PED certified pressurized jackets are available with full set of documentation.

With some special modification, the PerMix PTP series Paddle Blenders and Paddle Mixers can be used as a multi-stage process vessel, eliminating the need for additional specialist equipment. For example, it can be converted to be a vacuum mixer-dryer by adding heating jacket, shaft mechanical seal, vacuum tight semi-ball valve, industrial filtering housing, and/or other equipment such as condenser, nitrogen feeding, etc.

PerMix designs the full range of paddle mixers and paddle blenders, including the lab size & pilot size models for Research & Development purpose. The small size machine is very helpful for customers when the ingredients for R&D are expensive, thus helping our customer to save their limited budget at the first stage. With the good performance of the lab & pilot mixer, it is easy to scale up for a medium size or even bigger one.

The installation of PerMix Multi-chopper in the basic PTP powder mixer enables the breaking down of agglomerates during the mixing process.

Together with the mixing element, the PerMix Multi-chopper removes lumps in the initial product, chops pasty adhesives and hinders the formation of agglomeration during the moisturizing of powdered substances. The PerMix Multi-chopper is operated independently by its own motor.

- Various Types of Mixing Element
PerMix provides mainly two types of mixing elements – plow (for PTS Mixer) and paddle (for PTP Mixer). Both have their advantages: the plow shaped element can easily penetrate through the dense and thick powder or paste materials, while the paddle element can cover an even wider range of viscosity.

- Continuous Operation
We can supply machines for continuous work when a large capacity per hour is needed for the same material. Continuous paddle mixers differ from batch paddle mixers in that the mass flow of the product is from the inlet of the container to the discharge at the opposite end.

- Heating & Cooling Jacket
Jacketed trough for heating/cooling operation by steam, thermal oil, or water.

- Drive System
Drive system by geared motor, cycloidal reducer, worm reducer, belt or chain transmission, etc.

- Feeding & Discharging
A variety of feeding & discharging methods can be selected by the customers. Discharging port can be by manual or pneumatic operation.

- Access Door
Access doors can be designed for easy inspection & maintenance.

- Spray Nozzle
Liquid can be added into the powder by spray nozzles on a pipe which is installed on the top of the mixing trough. The necessary pump and tank can also be provided by us.

- Extended Height Bases
Height of our mixers can be defined according to customer’s condition.

- Construction Material
We are able to offer mixers with contact part to be built by Carbon steel, SS304, SS316/316L, Titanium, Duplex stainless steel, Hastelloy, etc. For abrasive materials we offer hardened steel as the contact part. Also we produce mixers all by stainless steel in order to meet the high hygienic requirement.

With some special modification, the PerMix PTP series Paddle Mixers and Paddle Blenders can be used as a multi-stage process vessel eliminating the need for additional specialist equipment. It can be used as a mixer-dryer, mixer-granulator, de-aerator, reactor and cooler