The PerMix PVR series Vertical Ribbon Mixers have a similar appearance with the popular Ribbon Blenders, but stands vertically.
PVR Vertical Ribbon Mixers have a simple, nevertheless, efficient and versatile blending machine for batch mixing of free-flowing powders. It is able to give perfect result for mixing due to the innovative design of an outer spiral type mixing element with an inner reverse direction screw, rotating together inside a conical shape trough allowing a perfect discharge of the mixed material.
The construction of PerMix PVR Vertical Ribbon Mixers are very compact: it consists of a cone vessel with the drive unit on the top and discharge valve at the bottom, and a tapered ribbon mounted on the central shaft.
In the cone vessel, there is a central tapered ribbon with very small clearance between its edge and the wall. The ribbon moves the materials upward along the vessel wall to the top, where the materials then drop by gravity into the center. During this continuous operation, material particles and heat are exchanged quickly which leads to a homogeneous product. Besides, the material particles are mixed with minimal mechanical and thermal stress, which makes this type of mixer a good solution for fragile and heat sensitive product.
1) High level of accuracy with minor component ratio to be 1:100,000
2) Gentle mixing for sensitive materials without generation of heat
3) No minimal quantity is required
4) Full discharge with minimal residue
5) Easy to clean in either dry or wet way
6) High heat transfer rate, ideal for heating or cooling process of the powders
7) Chopper can be installed for intensive mixing and lump breaking
The PerMix PVR series Vertical Ribbon Mixer has a similar appearance with the PRB series Ribbon Blender, but stands vertically same as our PNA series Conical Screw Mixer. PVR is an efficient and versatile blending machine for batch mixing of free-flowing powders. PVR series Vertical Ribbon Mixers are able to give perfect result of mixing due to the innovative design of an outer spiral type mixing element with an inner screw, rotating together in a conical shape trough allowing a complete discharge of all the mixed material without any residue.
This Conical Screw Vacuum Mixer Dryer, model PNAD-300, has a total capacity of 300L and working volume ~200L. It is designed specially for mixing and drying explosive materials under vacuum with ATEX approval. This mixer dryer comes with a mechanical seal in order to achieve very high vacuum up to -0.99barG. It is built full in SS, with SS jacket and insulation/sheathing, and a jacketed vacuum dust filter on the top lid.
Copyright © 2019 PerMix North America - All Rights Reserved.
INTERNATIONAL OFFICES & SUPPORT
CHINA OFFICE: No.1888, N. Shengxin Road, Jiading, Shanghai, 201807, China | Tel: +86 133 911 68218 | Email: firstname.lastname@example.org
WESTERN OFFICE: 230 Hazait St. Adi, 17940 Israel | Tel: +972-54-908-0144 | Email: email@example.com
NORTH AMERICAN & SOUTH AMERICAN OFFICE:Chicago, Illinois, USA | Tel: +1 630-649-1357 | Email: John.firstname.lastname@example.org
RUSSIAN OFFICE: HaRav Fatal 9, Jerusalem 9743009, Israel | Tel: +972 54 5990732 | Email: email@example.com